Office Networks
When building an office network, it is necessary to choose the right active network equipment, which in the future will satisfy all the needs of the company.
As a rule, modern office infrastructure includes PCs, IP phones, Wi-Fi access points, IP intercoms, IP cameras and other devices. Using PoE technology, which is supported by most modern devices, allows you to balance the cost ratio of CAPEX / OPEX.
PoE technology eliminates cost items such as the cost of laying power cables, installing additional outlets, etc., providing the user with great flexibility when placing equipment without being tied to electrical networks. In addition, the use of PoE allows you to centralize the management of the power supply system and user connections, protect terminal equipment from short circuits, and also monitor and control the amount of electricity consumed. An important factor is the ease of installation and the speed of network deployment: the less wired connections are in the system, the faster it will be implemented.
Wi-Tek offers a wide selection of PoE switches, both managed and unmanaged.
WI-PMSxx managed L2 PoE switches
The WI-PMSxxx series is used in modern high-speed local networks for various tasks: IP-video surveillance, IP-telephony, Wi-Fi, connection of office equipment. The functionality of the switches allows them to be used in solving the vast majority of corporate tasks both at the access level and at the pre-aggregation level.
| Model | WI-PMS310GF | WI-PMS312GF | WI-PMS318GF | WI-PMS320GF | WI-PMS326GF | WI-PMS328GF |
|---|---|---|---|---|---|---|
| Ports | 8GE + 2SFP | 8GE + 4 Combo | 16GE + 2SFP | 16GE + 2 Combo | 24GE + 2 SFP | 24GE + 4 Combo |
| PoE ports | 8 | 8 | 16 | 16 | 24 | 24 |
| PoE standard | 802.3af / at | 802.3af / at | 802.3af / at | 802.3af / at | 802.3af / at | 802.3af / at |
| PoE Budget | 150W | 150W | 350W | 350W | 400W | 400W |
| Cooling | Passive | Passive | Assets | Assets | Assets | Assets |
| Nutrition | AC220 + DC52 | AC220 | AC220 | AC220 | AC220 | AC220 |
| L2 | Yes | |||||
| Main functions | PoE Management, VLAN, QoS, IGMP Snooping, STP / RSTP / MSTP, ACL, Security | |||||
Gigabit ports
Ports supporting the 1000BASE-T, IEEE 802.3ab standard allow connecting subscriber devices at maximum speeds, up to 1 Gb / s.
Smart PoE
Function provides the ability to flexibly configure and monitor the power of connected devices: turning on / off devices on a schedule, auto-restart (watchdog), port priority.
Loop protection
Support for various technologies and protocols to prevent broadcast storms (loops) in arbitrary network topologies.
ACL (Access List Control)
Support for access control lists to allow / deny certain devices access to network resources based on IP addresses, ports and protocols.
Cisco like CLI
Logical, well-thought-out command-line interface (CLI), which is based on the Cisco interface, known to most IT professionals.
QoS
function provides the ability to prioritize the types of traffic (voice, video).
L3 functions
The presence of additional functionality of the L3 level (SVI, static routing) allows the use of switches that partially perform the functions of a router when building complex networks.
Optimum functional / price / quality ratio
WI-PS1 / 2 / 5xx Unmanaged PoE Switches
Unmanaged PoE switches of the WI-PS1xx, WI-PS2xx, WI-PS5xx series are used to connect IP cameras, IP intercoms, IP phones, Wi-Fi access points and other devices on the local network. The ease of use of this series of switches is combined with the maximum wide range of additional features.
| Model | WI-PS205 v2 | WI-PS205H | WI-PS210 v2 | WI-PS208H | WI-PS210G-O | WI-PS210G v2 | WI-PS518G v2 | WI-PS526G | WI-PS150GF |
|---|---|---|---|---|---|---|---|---|---|
| Ports | 6FE | 6FE | 10FE | 8FE | 6FE + 4GE | 8FE + 2GE | 16FE + 2GE + 1SFP | 24FE + 2 Combo GE / SFP | 48FE + 2 Combo GE / SFP |
| PoE ports | 4 | 4 | 8 | 8 | 8 | 8 | 16 | 24 | 48 |
| PoE standard | 802.3af / at / bt | 802.3af / at | 802.3af / at / bt | 802.3af / at | 802.3af / at | 802.3af / at / bt | 802.3af / at / bt | 802.3af / at | 802.3af / at |
| Hi PoE 60W | 1 port | - | 1 port | - | - | 1 port | 1-2 ports | - | - |
| Watchdog | Yes | no | Yes | no | no | Yes | - | - | - |
| PoE Budget | 65W | 35w | 120W | 65W | 120W | 150W | 200W | 250W | 700W |
| 250 m | Yes | Yes | Yes | Yes | no | Yes | Yes | Yes | - |
| Port vlan | Yes | no | Yes | Yes | no | Yes | - | Yes | - |
802.3bt Type 3
The PoE standard IEEE802.3bt allows you to connect the latest camcorders with power up to 60W and promising systems of smart lighting, building automation, signage.
Watchdog A
hardware-based control scheme for freezing powered PoE devices. This feature is implemented as part of Smart PoE on managed L2 switches, but is now available on unmanaged switches. A special controller continuously monitors the availability of connected devices and restarts them if necessary.
Extend
PoE and data transmission mode at a distance of up to 250 m; allows you to overcome the 100 m barrier, standard for Ethernet networks, and connect devices without using PoE repeaters.
VLAN
port isolation mode; allows isolating the traffic of connected devices at the physical level, which limits their communication at levels 2 and 3 and guarantees the security of content transfer.
Internal power supply
A reliable silent power supply ensures uninterrupted operation for a long service life, and its internal design simplifies the installation and operation of equipment and saves installation space.
Lightning protection 6kV
Protection against static electricity provides resistance to power surges.
Smart FAN
Switches are equipped with smart coolers that can turn on at a certain temperature. This allows you to reduce noise, extend the life of the cooler and save energy.
Optimum functional / price / quality ratio
WI-PS3xx Unmanaged PoE Switches
WI-PS3xx Series Unmanaged Gigabit Switches with PoE Function are used in modern high-speed office networks at the access level to connect IP phones, personal computers, Wi-Fi access points and other office equipment. Configuring and maintaining switches does not require specialized knowledge.
| Model | WI-PS305G | WI-PS305GF | WI-PS308G v2 | WI-PS308GH | WI-PS310GF | WI-PS320GF | WI-PS328GF |
|---|---|---|---|---|---|---|---|
| Ports | 5GE | 5GE + 1SFP | 10GE | 8GE | 8GE + 2SFP | 16GE + 2 Combo GE / SFP | 24GE + 4 Combo GE / SFP |
| PoE ports | 4 | 4 | 8 | 8 | 8 | 16 | 24 |
| PoE standard | 802.3af / at | 802.3af / at | 802.3af / at / bt | 802.3af / at | 802.3af / at | 802.3af / at | 802.3af / at |
| PoE Budget | 65W | 65W | 120W | 65W | 150W | 350W | 400W |
| Port vlan | Yes | - | - | Yes | Yes | Yes | - |
| Watchdog | no | no | Yes | no | no | no | no |
| 250 m | no | no | Yes | no | no | no | no |
| Cooling | Passive | Passive | Passive | Passive | Passive | Assets | Assets |
| P otaniye | AC220 | AC220 | AC220 | AC220 | AC220 + DC52 | AC220 | AC220 |
Gigabit ports
Ports supporting the 1000BASE-T, IEEE 802.3ab standard allow connecting subscriber devices at maximum speeds, up to 1 Gb / s.
802.3bt Type 3
The PoE standard IEEE802.3bt allows you to connect the latest camcorders with power up to 60W and promising systems of smart lighting, building automation, signage.
Watchdog A
hardware-based control scheme for freezing powered PoE devices. This feature is implemented as part of Smart PoE on managed L2 switches, but is now available on unmanaged switches. A special controller continuously monitors the availability of connected devices and restarts them if necessary.
Extend
PoE and data transmission mode at a distance of up to 250 m; allows you to overcome the 100 m barrier, standard for Ethernet networks, and connect devices without using PoE repeaters.
VLAN
port isolation mode; allows isolating the traffic of connected devices at the physical level, which limits their communication at levels 2 and 3 and guarantees the security of content transfer.
Internal power supply
A reliable silent power supply ensures uninterrupted operation for a long service life, and its internal design simplifies the installation and operation of equipment and saves installation space.
Lightning protection 6kV
Protection against static electricity provides resistance to power surges.
Smart FAN
Switches are equipped with smart coolers that can turn on at a certain temperature. This allows you to reduce noise, extend the life of the cooler and save energy.
Optimum functional / price / quality ratio
WI-PSxxxV Unmanaged PoE Switches
The Wi-Tek PSxxxV series of unmanaged PoE switches is designed primarily for IP telephony, but is also successfully used in video surveillance systems. Despite the fact that the switches are unmanaged, they have additional functionality.
| Model | WI-PS505V | WI-PS510V | WI-PS518GV | WI-PS526GV | WI-PS150GFV |
|---|---|---|---|---|---|
| Ports | 6FE | 10FE | 16FE + 2GE + 1SFP | 24FE + 2 Combo GE / SFP | 48FE + 2 Combo GE / SFP |
| PoE ports | 4 | 8 | 16 | 24 | 48 |
| PoE standard | 802.3af / at | 802.3af / at | 802.3af / at | 802.3af / at | 802.3af / at |
| PoE Budget | 30W | 65W | 150W | 150W | 300W |
| 250 m PoE transmission | Yes | Yes | Yes | Yes | - |
| Port vlan | Yes | Yes | - | Yes | - |
| QoS | Yes | Yes | Yes | Yes | Yes |
| Priority Ports | 2020-01-02 00:00:00 | 2020-01-04 00:00:00 | 2020-01-08 00:00:00 | 2020-01-16 00:00:00 | 2020-01-24 00:00:00 |
VLAN
port isolation mode; allows isolating the traffic of connected devices at the physical level, which limits their communication at levels 2 and 3 and guarantees the security of content transfer.
Extend
PoE transmission mode at a distance of up to 250 m; allows you to overcome the 100 m barrier, standard for Ethernet networks, and connect remote devices without the use of PoE repeaters.
Port-based QoS
Allows you to prioritize the transfer of data from specific connected devices (for example, a manager’s IP phone, video conferencing terminal, or surveillance camera).
Lightning protection 6kV
Protection against static electricity provides resistance to power surges.
Internal power supply
A reliable silent power supply ensures uninterrupted operation for a long service life, and its internal design simplifies the installation and operation of equipment and saves installation space.
Optimum functional / price / quality ratio
WI-MSxx managed L2 switches
WI-MSxx series of gigabit managed switches is a cost-effective solution designed for installation in modern local area networks of office infrastructure, which includes employee workstations, office equipment, Wi-Fi, IP-telephony, video surveillance.
The switches support basic management methods, such as WEB, CLI, SNMP, Telnet. The switches have L2 functions: QoS, VLAN, IGMP Snooping, DHCP Snooping, STP / RSTP / MSTP, Link Aggregation, ACL, Storm Control, BPDU filtering / guard, allowing them to be used in various schemes and used as corporate switches for access levels and preaggregation.
| Model | WI-MS310GF | WI-MS318GF | WI-MS326GF |
|---|---|---|---|
| Ports | 8GE + 2SFP | 16GE + 2SFP | 24GE + 2SFP |
| Cooling | Passive | Passive | Passive |
| Nutrition | AC220 + DC12 | AC220 | AC220 |
| L2 | Yes | ||
| Main functions | VLAN, QoS, IGMP Snooping, STP / RSTP / MSTP, ACL, Security | ||
Gigabit ports
Ports supporting the 1000BASE-T, IEEE 802.3ab standard allow connecting subscriber devices at maximum speeds, up to 1 Gb / s.
Loop protection
Support for various technologies and protocols to prevent broadcast storms (loops) in arbitrary network topologies.
ACL (Access List Control)
Support for access control lists to allow / deny certain devices access to network resources based on IP addresses, ports and protocols.
Cisco like CLI
Logical, well-thought-out command-line interface (CLI), which is based on the Cisco interface, known to most IT professionals.
QoS
function provides the ability to prioritize the types of traffic (voice, video).
L3 functions
The presence of additional functionality of the L3 level (SVI, static routing) allows the use of switches that partially perform the functions of a router when building complex networks.
Optimum functional / price / quality ratio
The WI-Pxx-Alien series of switches is designed for installations in facilities where devices with different types of PoE power are used.
| Model | WI-PMS310GF-Alien | WI-PMS328GF-Alien |
| Ports | 8GE + 2 SFP | 24GE + 4Combo |
| PoE standard | 802.3af / at, Passive PoE 24V | 802.3af / at / bt type 4, Passive PoE 24 |
| PoE Budget | 150W | 400W (700W optional) |
| Nutrition | DC 52V + AC 220V | AC 220V |
| L2 functional | Yes | Yes |
| Lightning protection | 6kV | 6kV |
802.3bt Type 4
The PoE standard IEEE802.3bt Type 4 allows you to connect the latest video cameras with a power of up to 90W and promising systems of smart lighting, building automation, signage.
Auto PoE
The switch provides the necessary type of power (Passive PoE 24V or IEEE802.3at / af 48V) in automatic or custom mode (for managed models). This allows you to power almost any type of PoE equipment.
Smart PoE
Function provides the ability to flexibly configure and monitor the power of connected devices: turning on / off devices on a schedule, auto-restart (watchdog), port priority.